8 Tips to Extend the Life of Your All-Terrain Vehicle

All-Terrain Vehicles, more commonly referred to as an ATV, are essentially land based vehicles designed to drive across areas and places where regular automobiles may not reach. ATVs are primarily built to provide comfort and some level of safety over uneven terrains and rocky areas. In snow, mountains, river banks and forests, ATVs are built to thrive.

1. Uses for an ATV

  • Rescue operations
  • Exploration and adventure
  • Sports, etc.

Buying an all-terrain can take a big bite out of your savings, and just like with any other expensive investment – home, property, luxury cars, you would want it to last for as long as is possible, while still functioning well.

Spending some time properly maintaining your ATV can saves so many hours and money needed for more aggressive repair work.

2. Break-in your ATV

While it might seem exciting to immediately take your vehicle out for a hard-core test drive, just like with any pair of shoes, you need to first give it some time to run and operate smoothly. Gently put your all-terrain through its paces, and you’ll be a much happier owner in the future.

3. Regular Oil Checks

The oil keeps the ATV running, and this is something that a lot of users seem to forget. Checking g and changing the oil on all-terrains is easy enough; easier than on a car, even. Follow the manual and be sure of the type of oil your ATV needs.

4. Cleaning

Just because your vehicle is built to take you into hard to reach areas and muddy grounds does not mean the ATV should always b ear signs of your adventures. Schedule in regular washes, and be sure to wash off all the mud and dirt caked in. Use some high quality car soap to keep your ride sparkly clean. remember that moisture and steel are never friends, and rust is never too far behind when the two meet.

5. Clean Air Filter

You need air, good clean air, to make your engine run smoothly. Make sure that your air filter is always clean and dry to allow a healthy, unblocked supply of air getting in. be sure to make a habit of checking the filters after dirty rides and while it’s in long storage.

6. Monitor Nuts and Bolts

Take some time to carefully inspect your ATV, and check every nut and bolt attached on the machine, and also check the important parts that are covered with rubber protection. You can also take the opportunity to add some grease to the bearings while you are at it.

7. Tire Pressure

A soft tire while you’re driving is one of the worst and most uncomfortable things you want to experience with your ATV. Just think of how it feels with your car and then picture it magnified while driving an ATV. To prevent accidents, invest in a low-pressure tired gauge and make sure to check on tire pressures before heading out. Here are some good options of wheels and tires.

8. Treat your Gas

Make sure that your gas is in good shape and keep bad stuff out of the fuel system. Spending a few moments of your time and some money in preparation for proper storage will greatly reduce the future trips to the mechanic.

9. Avoid Risks

Even though your ATV is built to take you those places you didn’t think you could, there are still limitations applicable. We suggest to check out the best ATV winches just to be on the safe side. Steep hills are just an example of areas you really should think twice before riding up. A fall could cost much more than just your expensive ATV. Check out the high-quality jeep wrangler hardtop options you have for all weather conditions for your ATV.

Enjoy your adventures in all-terrain with your ATV and apply above-mentioned tips to extend the life of your ATV.

Latest Articles

Related Articles